***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sun Nov 24, 2024 4:03 am


Board index » OLF Doc-U-build

All times are UTC - 5 hours





Post new topic Reply to topic  Page 1 of 2
  [ 37 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
A.j.celestini
 Post subject: My First (two) Builds
PostPosted: Tue Mar 15, 2011 10:45 pm 
Offline
Walnut
Walnut

Joined: Mon Mar 14, 2011 12:05 am
Posts: 21
First name: Andrew
City: Springfield
State: MO
Zip/Postal Code: 65810
Country: USA
Focus: Build
Status: Amateur
I figure it may be fun to document my first two builds here, and maybe get some free advice along the way. So without further delay...

Image

Image

Image

Image

Image

Image

This weekend I plan on thicknessing the backs and cutting them out to shape followed by bracing next weekend.
Top
 Profile  
 
orcaburger
PostPosted: Mon Mar 28, 2011 12:35 pm 
Offline
Walnut
Walnut

Joined: Wed Mar 31, 2010 11:53 am
Posts: 9
First name: jim
Last Name: millhollin
City: Bend
State: OR
Zip/Postal Code: 97702
Country: usa
Focus: Build
Status: Amateur
Nice pearl! Can you explain the use of the iron? Thanks Jim M
Top
 Profile  
 
A.j.celestini
PostPosted: Thu Mar 31, 2011 10:04 pm 
Offline
Walnut
Walnut

Joined: Mon Mar 14, 2011 12:05 am
Posts: 21
First name: Andrew
City: Springfield
State: MO
Zip/Postal Code: 65810
Country: USA
Focus: Build
Status: Amateur
Hi Jim,

If you look at picture 2 above, you will see that I round the piece of patterned purfling that goes between the two layers of abalone before attempting to glue to the soundboard. The iron, with a little water, makes it super easy to preshape.
Top
 Profile  
 
A.j.celestini
PostPosted: Thu Mar 31, 2011 10:21 pm 
Offline
Walnut
Walnut

Joined: Mon Mar 14, 2011 12:05 am
Posts: 21
First name: Andrew
City: Springfield
State: MO
Zip/Postal Code: 65810
Country: USA
Focus: Build
Status: Amateur
Some more photos. Please let me know if you all have any criticisms, questions, or comments. As stated previously, I've never done this before!

[/img]http://i1100.photobucket.com/albums/g405/Ajcelestini/P1010026.jpg[/img]

Image

Image

Image

Image

Image
Top
 Profile  
 
A.j.celestini
PostPosted: Thu Mar 31, 2011 10:25 pm 
Offline
Walnut
Walnut

Joined: Mon Mar 14, 2011 12:05 am
Posts: 21
First name: Andrew
City: Springfield
State: MO
Zip/Postal Code: 65810
Country: USA
Focus: Build
Status: Amateur
Some pictures of the top before I shape the braces tomorrow.

Image

Image

And some pictures of my laundry room in my apartment. Notice I'm missing the normal staples of this room.

Image

Image

Image
Top
 Profile  
 
Robbie_McD
PostPosted: Fri Apr 01, 2011 12:04 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Feb 28, 2009 10:34 pm
Posts: 1065
First name: Rob
Last Name: McDougall
City: Cochrane
State: Alberta
Nice work!
Looks like you have done your homework :mrgreen:
How wide are those finger braces?
Top
 Profile  
 
A.j.celestini
PostPosted: Fri Apr 01, 2011 5:11 pm 
Offline
Walnut
Walnut

Joined: Mon Mar 14, 2011 12:05 am
Posts: 21
First name: Andrew
City: Springfield
State: MO
Zip/Postal Code: 65810
Country: USA
Focus: Build
Status: Amateur
Rob,

They are 8mm wide by 9.5mm tall right now. I'm going to start shaping the tops tonight.
Top
 Profile  
 
Robbie_McD
PostPosted: Fri Apr 01, 2011 8:48 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Feb 28, 2009 10:34 pm
Posts: 1065
First name: Rob
Last Name: McDougall
City: Cochrane
State: Alberta
Carving the top braces is my favorite part of the build.....
Keep the pix coming! [:Y:]
Top
 Profile  
 
A.j.celestini
PostPosted: Sat Apr 02, 2011 5:29 pm 
Offline
Walnut
Walnut

Joined: Mon Mar 14, 2011 12:05 am
Posts: 21
First name: Andrew
City: Springfield
State: MO
Zip/Postal Code: 65810
Country: USA
Focus: Build
Status: Amateur
First top carved. What do you guys think? Top thickness is .100.

Image

Image

Image

Image
Top
 Profile  
 
Chris Pile
PostPosted: Sat Apr 02, 2011 6:32 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5821
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Nicely done!
I like your gobar deck, too.
Organized shop space is good, too.

_________________
"Act your age, not your shoe size" - Prince
Top
 Profile  
 
A.j.celestini
PostPosted: Wed Apr 13, 2011 11:15 pm 
Offline
Walnut
Walnut

Joined: Mon Mar 14, 2011 12:05 am
Posts: 21
First name: Andrew
City: Springfield
State: MO
Zip/Postal Code: 65810
Country: USA
Focus: Build
Status: Amateur
A few updates below. Bending the sides, kerfing and rough pictures of the body. I have to say the most frustrating part of this process as of now has been the kerfing glue up. No one told me I would be cursing up a storm and throwing things around my shop during this part!!

Bought an LMI Side Bender. Worked very well, and I am spoiled.
Image

Image

My least favorite part so far...
Image

Image

Before some cleanup work. I'm really happy with the way it turned out.
Image

Image

Can't wait to work on the binding this weekend and get everything clean and rough sanded
Image
Top
 Profile  
 
Bobc
PostPosted: Thu Apr 14, 2011 6:10 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 9:42 pm
Posts: 4217
Location: Buffalo, NY
First name: Robert
Last Name: Cefalu
City: Buffalo
State: NY
Zip/Postal Code: 14217
Country: US
Looking good Andrew.

_________________
Beautiful and unusual tone woods at a reasonable price.
http://www.rctonewoods.com/RCT_Store
The Zootman
1109 Military Rd.
Kenmore, NY 14217
(716) 874-1498
Top
 Profile  
 
A.j.celestini
PostPosted: Thu Apr 14, 2011 6:04 pm 
Offline
Walnut
Walnut

Joined: Mon Mar 14, 2011 12:05 am
Posts: 21
First name: Andrew
City: Springfield
State: MO
Zip/Postal Code: 65810
Country: USA
Focus: Build
Status: Amateur
Bob,

A big thanks to you for supplying the amazing tonewoods that I'm using in most of the photos!
Top
 Profile  
 
A.j.celestini
PostPosted: Fri Apr 22, 2011 8:12 pm 
Offline
Walnut
Walnut

Joined: Mon Mar 14, 2011 12:05 am
Posts: 21
First name: Andrew
City: Springfield
State: MO
Zip/Postal Code: 65810
Country: USA
Focus: Build
Status: Amateur
What do you guys think about gluing the purfling in first and then the binding? The jig I made worked well, but not perfect!

Image

Image
Top
 Profile  
 
A.j.celestini
PostPosted: Sun Apr 24, 2011 12:04 pm 
Offline
Walnut
Walnut

Joined: Mon Mar 14, 2011 12:05 am
Posts: 21
First name: Andrew
City: Springfield
State: MO
Zip/Postal Code: 65810
Country: USA
Focus: Build
Status: Amateur
While cutting the the top binding channel, the cutting bit came loose and dug down about another 1.5mm! poop! I think I'm going to remedy the situation by using two strips of purfling across the top.
Image

Ready for binding
Image

Image

Hog Tied. Hoping for good results when I unwarp at 1:00 pm!
Image
Top
 Profile  
 
A.j.celestini
PostPosted: Thu Apr 28, 2011 11:34 pm 
Offline
Walnut
Walnut

Joined: Mon Mar 14, 2011 12:05 am
Posts: 21
First name: Andrew
City: Springfield
State: MO
Zip/Postal Code: 65810
Country: USA
Focus: Build
Status: Amateur
Just a couple quick snapshots of the binding. I will get some better photos once the second guitar is bound and I have some time to clean them up, fill in gaps, etc.

Image

Image
Top
 Profile  
 
A.j.celestini
PostPosted: Sun May 08, 2011 10:36 pm 
Offline
Walnut
Walnut

Joined: Mon Mar 14, 2011 12:05 am
Posts: 21
First name: Andrew
City: Springfield
State: MO
Zip/Postal Code: 65810
Country: USA
Focus: Build
Status: Amateur
This weekend I built Robert O'Brien style jigs to help me cut the mortise and tenon. I also drew out the head design on some graph paper and began forming a template out of a scrap piece of wood.

Image

Image

Image

Image

Image

I'm pretty terrified to cut the mortise and tenon this week. The steaks are high and this is obviously my first time. Anyone have any suggest or words of wisdom? Of course pictures will follow, good or bad.
Top
 Profile  
 
A.j.celestini
PostPosted: Sun May 15, 2011 11:02 pm 
Offline
Walnut
Walnut

Joined: Mon Mar 14, 2011 12:05 am
Posts: 21
First name: Andrew
City: Springfield
State: MO
Zip/Postal Code: 65810
Country: USA
Focus: Build
Status: Amateur
Image

Image

Image
Top
 Profile  
 
Steve Saville
PostPosted: Mon May 16, 2011 11:28 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Nov 26, 2005 7:32 pm
Posts: 1969
Location: United States
A.j.celestini wrote:
Some more photos. Please let me know if you all have any criticisms, questions, or comments. As stated previously, I've never done this before!

Image


One comment - Do not do this step without good safety glasses. Those bars can really fly out of there.

_________________
"An adventure is only an inconvenience rightly considered. An inconvenience is an adventure wrongly considered." G. K. Chesterton.
Top
 Profile  
 
A.j.celestini
PostPosted: Sun May 22, 2011 6:58 pm 
Offline
Walnut
Walnut

Joined: Mon Mar 14, 2011 12:05 am
Posts: 21
First name: Andrew
City: Springfield
State: MO
Zip/Postal Code: 65810
Country: USA
Focus: Build
Status: Amateur
Image

Image

Image

Image

Image

Image
Top
 Profile  
 
A.j.celestini
PostPosted: Sun May 29, 2011 10:03 pm 
Offline
Walnut
Walnut

Joined: Mon Mar 14, 2011 12:05 am
Posts: 21
First name: Andrew
City: Springfield
State: MO
Zip/Postal Code: 65810
Country: USA
Focus: Build
Status: Amateur
Getting close! I did mess up on the first abalone fret position marker, gah! I had to put the tuners in there just get an idea of what the final product will look like.

Image
Top
 Profile  
 
oval soundhole
PostPosted: Sun May 29, 2011 11:35 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue May 18, 2010 6:42 pm
Posts: 569
First name: Brian
Last Name: Itzkin
State: NY/Granada
Country: USA/Spain
Focus: Build
it looks really nice. What type of tuners are you using?
Top
 Profile  
 
A.j.celestini
PostPosted: Mon May 30, 2011 10:35 pm 
Offline
Walnut
Walnut

Joined: Mon Mar 14, 2011 12:05 am
Posts: 21
First name: Andrew
City: Springfield
State: MO
Zip/Postal Code: 65810
Country: USA
Focus: Build
Status: Amateur
Tuners are Gotoh 510. Gold with Tortoise knobs.
Top
 Profile  
 
A.j.celestini
PostPosted: Sun Jun 05, 2011 10:12 pm 
Offline
Walnut
Walnut

Joined: Mon Mar 14, 2011 12:05 am
Posts: 21
First name: Andrew
City: Springfield
State: MO
Zip/Postal Code: 65810
Country: USA
Focus: Build
Status: Amateur
Major building phase is done. I will prep the surface for the finish over the next couple of days and then start on that journey!

Image

Image
Top
 Profile  
 
amcardon
PostPosted: Mon Jun 06, 2011 10:35 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Apr 29, 2011 5:19 pm
Posts: 78
First name: Aaron
City: Mustang
State: OK
Country: USA
Looks great, Brother! She is really going to shine under finish! Speaking of finish, what are you going to use?

_________________
"Never give in. Never give in. Never, never, never, never--in nothing, great or small, large or petty--never give in, except to convictions of honor and good sense. Never yield to force. Never yield to the apparently overwhelming might of the enemy." - Winston Churchill
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 37 posts ]  Go to page 1, 2  Next

Board index » OLF Doc-U-build

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com